Do you want to know about carbon fiber and fiberglass, or have an interest in the technical data and information available for these advanced composite materials? This section is dedicated to all of the materials that we offer, and also contains some tutorials about how to use them sucessfully.
Traditional material dial tables, manufactured from either aluminum or steel, have tooling attachment holes drilled and tapped into the dial surface. Of particular interest is
Pull out comparison analysis of inserts compared with aluminum Mic6, aluminum 6061-T6 and A36 steel. Insert pull out was determined using a shear strength allowable
Attachment of tooling to skinned sandwich structures for some applications requires the bolt head to be recessed into the structure. The normal custom and practice
An In-Depth look at composite fastening A compression performance comparison of INSERT BLOCKS manufactured from different materials subjected to an axial fatigue load. Supporting and
The application of inserts in a Carbon Dial Table is outlined by the steps provided in the photographs.
To alleviate any issues of foam compression, creep and tight tolerance, Carbon Dial Tables are required to have metallic inserts adhesively bonded into the composite
